First Project
69/142
netPLC C100 | Startup Guide
DOC090701UM02EN | Revision 2 | English | 2009-10 | Released | Public
© Hilscher, 2009
3. Open the slave configuration window
¾
Open the configuration window of the slaves with a double click the icon
of the slave device.
¾
Select the entry
Module
in the navigation area.
¾
The slave device used in this example already has selected modules at
Configured Modules
. If you use an other slave then insert modules
from
Available Modules
to
Configured Modules
by using the insert
button.
°
In
Configured Modules
the information is displayed that the slave
device occupies 2 byte of input data and 2 byte of output data.
4. Close the configuration window
¾
Click on
OK
to close the windows and to apply the settings.
°
The window closes and the settings are applied.
