Introduction
7/64
COM-C | Communication Module
DOC021001DG12EN | Revision 12 | English | 2011-06 | Released | Public
© Hilscher, 2002-2011
Rev
Date
Name
Revision
10 2010-07-13
H.
Hentsch
Table 2: Comparison of supported protocols for COM and COMX
CANopen Slave, PROFIBUS DP Slave and DeviceNet Slave for COMX-C sup-
ported
Table 9: Available COMX-C Modules
updated with COMX-C for Fieldbus Slaves
Table 7: Usage of Bolt for COM Modules
updated
Fieldbus Connector X2 for CANopen-Master/-Slave
added
Section
Fieldbus Connector X2 for DeviceNet-Master/-Slave
: COMX-CN-DNS
added
Section
Fieldbus Connector X2 for PROFIBUS-Master/-Slave
: COMX-CN-DPS
added
Section
Fieldbus Connector X2 for CANopen-Master/-Slave
Fieldbus Connector X2 for PROFIBUS-Master/-Slave
: Note 2 added
Section
Diagnostic Interface USB
: Note removed, because firmware now supports
USB
Table 74: Hardware Revision of COMX Modules with new USB Interface
updated
Table 75: Hardware Revision of COMX Modules with old USB Interface
updated
German text replaced by English text in the following drawings: M0500081,
M0500084, M0600121, M0900141, M0900151, M0400353
Section
SERCOS III Slave
,
CANopen Slave
,
DeviceNet Slave
and
PROFIBUS
DP Slave
added with LED Description
Table 38: Technical Data – Operating Condition
: COMX-Cx-COS, COMX-Cx-DNS
and COMX-Cx-DPS added
11 2011-03-20
H.
Hentsch Section
Mechanical Dimensions of COM-C Modules
:
M0200373 updated to M0200374, M0200463 updated to M0200464. Tolerance of
PCB thickness is 1.00 mm (-0,0 +0,2)
Section
: Headline ‘Cheaper version’ set to right position
12 2011-06-10
R.
Göbel
H. Hentsch
Separation of documents for COM and COMX.
This manual contains the description for COM.
COM-A and COM-B removed as they are to be discontinued.
Section Mechanical Dimensions of COM-C Modules: Section updated, M0200374
updated, M0300632 updated
Table 5: COM-CA-EIS and COM-CN-EIS added
Section
Meaning of the Rotary
Switch added
Table 4: List of Revisions (Part 2)
