Introduction
7/72
Changes will be included in future manuals and do not constitute any
obligations. There is no entitlement to revisions of delivered documents.
The manual delivered with the product applies.
Hilscher Gesellschaft für Systemautomation mbH is not liable under any
circumstances for direct, indirect, incidental or followon damage or loss of
earnings resulting from the use of the information contained in this
publication.
1.3.3
Exclusion of liability
The software was produced and tested with utmost care by Hilscher
Gesellschaft für Systemautomation mbH and is made available as is. No
warranty can be assumed for the performance and flawlessness of the
software for all usage conditions and cases and for the results produced
when utilized by the user. Liability for any damage that may result from the
use of the hardware or software or related documents, is limited to cases of
intent or grossly negligent violation of significant contractual obligations.
Indemnity claims for the violation of significant contractual obligations are
limited to damage that are foreseeable and typical for this type of contract.
It is strictly prohibited to use the software in the following areas:
·
for military purposes or in weapon systems;
·
for the design, construction, maintenance or operation of nuclear
facilities;
·
in air traffic control systems, air traffic or air traffic communication
systems;
·
in life support systems;
·
in systems in which failures in the software could lead to personal injury
or injuries leading to death.
We inform you that the software was not developed for use in dangerous
environments requiring failproof control mechanisms. Use of the software
in such an environment occurs at your own risk. No liability is assumed for
damage or losses due to unauthorized use.
1.3.4
Warranty
Although the hardware and software was developed with utmost care and
tested intensively, Hilscher Gesellschaft für Systemautomation mbH does
not guarantee its suitability for any purpose not confirmed in writing. It
cannot be guaranteed that the hardware and software will meet your
requirements, that the use of the software operates without interruption and
that the software is free of errors. No guarantee is made regarding
infringements, violations of patents, rights of ownership or the freedom from
interference by third parties. No additional guarantees or assurances are
made regarding marketability, freedom of defect of title, integration or
usability for certain purposes unless they are required in accordance with
the law and cannot be limited. Warranty claims are limited to the right to
claim rectification.
NXHX 51ETM | Development Board
DOC120606HW06EN | Revision 6 | English | 201501 | Released | Public
© Hilscher 2012 – 2015
