HiLook DVR-200Q-K1 Series Page 40 User Manual Download

Page: 40 / 95

Digital Video Recorder User Manual

The motion detection event will be analyzed by your device.

PIR

The motion detection event will be analyzed by certain analog PIR cameras.

7. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered

by human or vehicle.

Note

This function is only available for certain models.

8. Set the arming schedule. Refer to for Configure Arming Scheduledetails.
9. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
10. Click Apply.

5.3.5 Configure Arming Schedule

Steps
1. Select Arming Schedule.
2. Choose one day of a week and set the time segment. Up to eight time periods can be set within

each day.

Note

Time periods shall not be repeated or overlapped.

Figure 5-11 Set Arming Schedule

3. Click Apply.

Summary of Contents for DVR-200Q-K1 Series
































































































Search results

Summary of Contents for DVR-200Q-K1 Series

Reviews:

Related manuals for DVR-200Q-K1 Series

Brands by name

Popular brands

HiLook DVR-200Q-K1 Series, User Manual

Search results

Summary of Contents for DVR-200Q-K1 Series

Reviews:

Related manuals for DVR-200Q-K1 Series

Brands by name

Popular brands