Digital Video Recorder User Manual
24
5.3.2 Network Camera
Add Network Camera by Device Password
Add network cameras which the password is the same as your video recorder.
Before You Start
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct. Refer to General for details.
●
Ensure the network camera password is the same as your video recorder.
Steps
1. Go to Configuration → Camera → IP Camera. The online cameras on the same network
segment with your video recorder are displayed in Online Device List.
Figure 5-8 IP Camera Management Interface
2. Select a desired network camera.
3. Click
to add the camera.
Note
If the camera is inactive, the device will activate it automatically with the password you have set
during device activation.
Add Network Camera Manually
Before You Start
●
Ensure your network camera is on the same network segment with that of your video recorder.
●
Ensure the network connection is valid and correct.
●
Ensure the network camera is activated.
Steps
1. Go to Configuration → Camera → IP Camera.
2. Click
in Added Device List.
3. Set network camera parameters, including IP address, protocol, management port, etc.
4. Optional: Enable Use Camera Activation Password to use the device password to add network
camera(s).
5. Optional: Click Add More to add another network camera.
6. Click Add.
