Hillyard TRIDENT NM14, Service Manual

Page: 12 / 39

3.1.4 Drying system: what to do if. . .
The machine doesn’t dry well
1. The machine is switched off ⇒
Switch on the machine.
2. The machine doesn’t switch on ⇒ Refer to the proper section
(see section
3.1.1 at page 9 )
.
3. The vacuum motor doesn’t work ⇒ Refer to the Advanced Guide
(see section
3.2.6 at page 16 )
.
4. The recovery tank is full
⇒
Empty the recovery tank following
the proper procedure.
5. The squeegee is lifted up from the
floor ⇒ Lower down the squeegee.
6. The squeegee rubber blades are
worn out or broken ⇒ Rotate or replace the squeegee rub-
ber blades
(see section 7.3.1 at page 32 )
.
7. The squeegee vacuum chamber or
the adapter is stuck or dirty
⇒
Clean the squeegee.
8. The vacuum hose is stuck or bro-
ken ⇒ Clean or replace the vacuum hose.
9. The vacuum hose is not properly
fitted in ⇒ Connect the vacuum hose properly.
10. The air/water vacuum hoses body
is stuck or broken
⇒
Clean or replace the vacuum hoses
body.
11. The recovery tank lid or suction line
cover are not present or are not
properly positioned ⇒ Correctly position the parts.
12. The recovery tank does not guaran-
tee the tightness of the aspiration ⇒ Replace the tank.
12