Hillyard 108538, Service Manual

Page: 45 / 117

Check the correct setting of the battery control card with the installed batteries.
To properly adjust the battery control card, proceed as follows:
ˆ
Put the machine in safe conditions.
ˆ
Remove the steering wheel carter.
ˆ
On the back of the hourmeter, Set the dipswitch, following the instructions.
ˆ
Restore the steering wheel carter.
Setting of battery type
Voltage DP1 DP2
12 V OFF OFF
24 V OFF ON
36 V ON OFF
48 V ON ON
Set Up DP3 DP4 DP5 DP6 Threshold
Lead Acid (Pb60) OFF OFF OFF OFF 20,2 V
OFF OFF OFF ON 20,4 V
OFF OFF ON OFF 20,6 V
OFF OFF ON ON 20,8 V
GEL+ / AGM+ (Gel80) OFF ON OFF OFF 21,0 V
OFF ON OFF ON 21,2 V
OFF ON ON OFF 21,4 V
OFF ON ON ON 21,6 V
GEL / AGM (Gel60) ON OFF OFF OFF 21,8 V
ON OFF OFF ON 22,0 V
ON OFF ON OFF 22,2 V
ON OFF ON ON 22,4 V
ON ON OFF OFF 22,6 V
ON ON OFF ON 22,8 V
Pure Lead (PPb) ON ON ON OFF 23,0 V
ON ON ON ON 23,2 V
45