Hillyard 108538, Service Manual

Page: 37 / 117

3.2.20 Lights
The machine is equipped with Front and Rear position lights (A), working Front (B) and backward Rear (B).
R30SC-R28SC Plus can turn ON and OFF the working lights; R30SC Base has the working lights always ON.
On both models the rear position lights increase the brightness if the electronic brake is pressed.
3.2.21 Traction Encoder
The Encoder is located inside the traction motor and transfers information on the speed of the machine to the
Main card.
3.2.22 Electrobrake
L’Electrobrake is assembled on the traction motor. With the machine off it is always activated, is unlocked only
when the machine is running and pedal pressed. It can be unlocked manually.
3.2.23 Traction Pedal
The traction pedal contains an activation microswitch and a non-adjustable electronic potentiometer.
3.2.24 Battery charger and Display (Optional)
The machine is available with the optional battery charger. To access to the battery charger and the battery
compartment is sufficient to lift the recovery tank. On the batteries is present a bridge cable with general
protection fuse 80 Ampere.
The charger Display allows easy inspection of the state of the charging cycle, and a quick connection of the
power cord.
3.2.25 Rear Camera (Plus)
The rear view camera positioned on the hose support allows to move the machine in reverse avoiding the
operator to twist the back and neck.
37