24
Chapter 2 Installation Preparation
|
Hillstone
Hillstone SG-6000 X-Series Hardware Reference Guide
♦
Verifying parts received
Unpacking the Package
The device is wrapped in antistatic bags and shipped in cardboard carton. Besides the
chassis, the carton also contains two power modules and an accessory box.
The carton is 655.0mm wide, 880.0mm deep and 605.0 high. The total weight of
packaging materials and the hardware is 53.0kg.
Note: The device is maximally protected inside the shipping carton. Do not unpack it
until you are ready to begin installation.
To unpack the package, take the following steps:
1.
Move the shipping carton to a place as close to the installation site as possible,
where you have enough room to remove packages (you are suggested to use a
forklift or cart).
2.
Position the carton with the arrows pointing up.
3.
Cut the packing belts and remove the cover.
4.
Take out the hardware components and accessory box, and then remove the
foam.
5.
Verify the parts received against the packing list.
6.
Open the antistatic bag wrapping the chassis.
