Part 4 - Search
78
Select
Option...
to configure Text-In Search options.
•
Select
First
under
From
and
Last
under
To
to search
the recording from start to finish. Alternatively, you
can uncheck the
First
and
Last
options and specify
the search time frame manually.
•
Channels
: Select a channel.
•
Select
Text-In Device
to select a device type.
•
+ Button
: Add a search variable.
•
Case Sensitive
: Configure case sensitivity.
•
Load
: Retrieve stored search option settings.
•
Save
: Save the current search option settings.
Once all the options have been configured, select
Search
to begin the search and return to the
Text-In
Search
setup window.
Clip Copy
Clip Copy
Select
Clip-Copy
–
Clip Copy
from the Search menu or
press the remote control's
CLIP COPY
button while in
Live or Playback mode to open up the
Clip Copy
setup
window. Specify the
From
and
To
settings.
A-B Clip Copy
Designate a start point and an end point and copy the
data in between. Select
Clip-Copy
–
A-B Clip Copy
from
the Search menu to set point A. The
icon will appear
on the status indicator area on the upper right corner
of the screen. Select
Clip-Copy
–
A-B Clip Copy
once
again to set point B. The Clip Copy Setup window will
appear. Select A and B points are automatically applied
as
From
and
To
values.
•
Channels
: Specify which channel to save the
recording to.
•
Password
: Enable password protection for the saved
video clip and assign a password.
•
Dest.
: Select which storage media to use.
•
The NVR displays the volume as 30GB regardless
of the actual disk volume and the maximum size
limit on Clip Copy files is 30GB. If the video clip is
uploaded after being clipcopying, video clips will
be deleted. If there are same files, the video clips
cannot be copied.
•
File name
: Designate a name for the file. The name
may be up to 63 characters in length.
Special characters such as \, /, :, ;, *, ?, !, “, <, >, and | are
not permitted.
•
Include Text-In Data
: Enabling this option will save
the video clip along with any available text-in data.
•
Use Site Info
: Adds
Site
info to the Clip Copy file's
name.
Special characters contained in the location info (such
as \, /, :, ;, *, ?, !, “, <, >, and |) will be replaced with _
when the information is added to the file name.
Selecting
Start
displays a calculation on the size of the
data to be copied. Check the calculation and then select
Continue
to proceed. While Clip Copy is in progress, you
can select
Cancel
to cancel the process or select
Close
to allow the window to run in the background. Selecting
Close
does not cancel Clip Copy. Once the process is
complete, you will be prompted with a confirmation
window.
