Hills PACOM StIP-16PDX, User Manual

Page: 70 / 97

Part 3 - Configuration
70
Status Setup
Refer to the
Menu Use on page 36
for basic information on using the Setup menus.
Event
This screen displays an overview of all events.
When an event occurs, the corresponding channel flashes for 5 seconds.
Event Types
Motion Trip Zone Tampering Alarm-In
Video Loss Audio Detection Recording Fail Text-In
Check Alarm-In Fan Error Face Detection
•
Panic Record
: Displays event status based on current Panic Record status.
• Check Recording : Displays event status based on System Monitoring settings. For more information, refer to the
Monitoring on page 42
.
• Disk Almost Full / Disk Full : If the storage device is not in Recycle status, event status is displayed when the amount
of disk space specified under System Monitoring is reached and when the disk becomes 100% full. For more
information, refer to the
Monitoring on page 42
.
• Fan Error : Event is indicated when the cooling fan cannot reach a certain RPM or fails for longer than 50 seconds.
•
eSATA Disconnected
: Event status is displayed when an eSATA device is abruptly disconnected.
• Disk Config Change : It will be highlighted when the NVR reboots after the hard disk drive has been replaced.
•
No Storage Found:
It will be highlighted when no recordable storage device has been found.