Auxiliary Key
- If programmed, you can activate the auxiliary alarm by pressing the
Emergency Activation [
Auxiliary
] key for two seconds. If your system is connected
to a monitoring center, an emergency report could be sent to that center. This key
should only be pressed in an emergency situation requiring response by
emergency personnel.
Police (Panic/Hold-Up) Key
- If programmed, when the Emergency Activation
[
Police
] key is pressed for two seconds, a local audible alarm will sound. If your
system is connected to a monitoring center, an emergency report could be
transmitted to that center. These keys should only be pressed in an emergency
situation requiring immediate response by law enforcement personnel.
NOTE
:
Some Panic/Hold-Up alarms are programmed to be silent at the protected site
while reporting an alarm to the monitoring center. Check with your installing
company to determine how your security system will respond to the Panic/Hold-Up
activation.
FUNCTION MENU
The functions listed below are found in the Function Menu.
Step 1 Press
r
The display will now begin scrolling though a list of functions
and the corresponding numbers associated with those functions.
Step 2 Press the number listed on the display in order to access that particular
function.
Hint
: If you already know the function numbers simply press [
r
] followed
by the function number.
The following list of menu selections will scroll automatically.
NOTE
: Some of the
functions are not listed because they are installer level functions. Each time the [
r
]
key is pressed the next menu item will be displayed. Press
#
to exit to this
menu.
This is a sample of the display. The list
below reflects the available functions.
Select an Option
Press
À
for Help
ù
=Zone Review
45=Display Test
90=Log Review
0=Set Tone
46=Light Control
91=View Settings
1=Master Mode
49=Espa
ñ
ol
97=Set Date/Time
2=Service Check
5=User PIN
CHIME=Walk Test
3=Alarm Memory
6=User Authority
EXIT=Silent Exit
44=Test 7=Detector
Reset
Hills LCD Keypad
10