III. KEYPAD
FUNCTIONS
ARMING YOUR SYSTEM IN THE “AWAY” MODE
AWAY is utilized when the user is going away from the premise and wants the
interior protected. Listed below are the steps to arm in the AWAY Mode:
Step 1
Close all protected doors and windows.
Ready light
will be on or
flashing when all protected
zones and sensors are
secure.
NOTE: If any zones
are bypassed, a sensor in
that zone can be violated without affecting the ready light.
The security system will not
arm if the
ready light
is off.
Refer to "Making Your
System Ready to Arm".
If the
power light
is off, you have no AC power. Restore power if
possible. If not, contact the installing company.
Step 2
Enter your 4 or 6 digit user code to arm the system.
The
armed and exit lights
will
illuminate.
You may now leave the building.
System Ready
Type Code to Arm
System Not Ready
For help, press
º
System Armed
All Zones Secure
IMPORTANT!
The exit light will flash rapidly for the last 10 seconds of the exit delay as a
warning to the user that the exit time is about to expire. The user may wish to
disarm and rearm the system if more time is needed.
MAKING YOUR SYSTEM READY TO ARM
If the
ready light
is not on or if it is flashing, a zone is not secure. To identify this
zone, use the scroll keys
•
–
to the right of the display to browse through the
zones that are not normal. If you wish to bypass or unbypass one of these zones,
press the [
BYPASS
] key while that zone is being displayed. When finished viewing
the zones, press the
#
key to return to the code entry screen.
Hills LCD Keypad
5