manualshive.com logo in svg

Hill-Rom Volara PVL1, User Manual

Share
Download
Hill-Rom Volara PVL1 User Manual Download Page 62

54

Volara™ System, Model PVL1 User Manual (196286 REV C) 

Device Settings

Connect to a Public Network

NOTES:

•

After initial connection, the WiFi will automatically connect when 
the Volara™ System is turned on and within WiFi range.

•

Data will transmit automatically at the end of the therapy session, 
or when the Volara™ System is powered up the next time.

•

Do not connect to a public WiFi if any log on Terms and 
Conditions must be accepted to use that public WiFi.

1.

Swipe the 

Options

 tab left, then press 

the 

Options

 menu control.

2.

Press the 

Device Settings

 menu control.

3.

Press 

Connect

.

4.

Press 

WiFi

.

5.

Slide the setting for 

WiFi

 to 

ON

.

6.

Press 

Scan

 to locate the wireless 

networks available.

Depending on the networks available, 
the scan will take a few minutes. When 
complete, a list of wireless networks 
shows.

7.

When the connection is successful, a 
green check mark shows next to the 
access point name.

196654__C_2019-Apr-29_Cleaned

Summary of Contents for Volara PVL1





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands