manualshive.com logo in svg

Hill-Rom Volara PVL1, User Manual

Share
Download
Hill-Rom Volara PVL1 User Manual Download Page 103

Volara™ System, Model PVL1 User Manual (196286 REV C) 

 95

Storage and Handling

S

HIPPING AND 

P

ACKAGING

WARNING:

To help prevent injury and/or equipment damage, obey these 

warnings

:

•

Warning

—Do not ship the battery with over a 30% charge. 

•

Warning

—Do not store the battery at temperatures above 140°F 

(60°C), such as inside of a car on a hot day or in direct sunlight.

CAUTION:

Caution

—If shipping is required, the original packing material provides 

the best protection for the system. Keep the original packing material. 
Failure to do so could cause equipment damage. 

If shipping is required, ship the unit in its original packing material. When 
the system has reached the end of its useful life, discard the system in 
accordance with local and federal standards. 

S

HIPPING FOR 

R

EPAIR

When the control unit is shipped for repair, follow these shipping and 
packaging instructions:

•

Request and get a return material authorization (RMA) number from 
Hill-Rom.

You will get a return kit in the mail.

1.

Clean and disinfect the unit. Make sure it is dry before you pack it. See 
“Clean the Control Unit and Stand with Cart” on page 80.

2.

Follow the instructions in the return kit to pack the unit.

3.

Close and seal the box, and apply the applicable labels on the outside 
of the box.

4.

During shipment, the unit should be kept dry and kept at 
temperatures of -4° F to 140° F (-20° C to 60° C).

196654__C_2019-Apr-29_Cleaned

Summary of Contents for Volara PVL1





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands