October 13, 2003
is444re
Page 3 of 24
DRAFT 08/27/03
Order of Installation
The numbered steps below correspond with the order of installation for the listed components.
1.
Determine the type of wall (D) and construction type (see figure 2 on page 4).
2.
Install the medical gas drops (E).
3.
Perform one of the following:
•
To install the vertical chase (with a breaker panel) (B), install the vertical chase
hanger bracket and the vertical chase with a breaker panel (B).
•
Install the vertical chase (without a breaker panel) (C).
4.
To install the raceway (A), perform the following:
a.
Install the raceway hanger bracket (F).
b.
Position and install a single section of raceway (A).
c.
Mount multiple sections of raceway (A).
d.
Connect the gas pipe.
5.
To install the covers, perform the following:
a.
Install the gas pipe cover (G).
b.
Install the vertical chase bottom cover (H).
Summary of Contents for Itegris 2001B
