HIKVISION UD.6L0202D1962A01 User Manual Download Page 55

Page: 55 / 208

User Manual of Digital Video Recorder

3.2

Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.

•

Single Screen:

show only one screen on the monitor.

•

Multi-screen:

show multiple screens on the monitor simultaneously.

•

Auto-switch:

the screen is auto switched to the next one. And you must set the dwell time for each screen

on the configuration menu before enabling the auto-switch. Menu>Configuration>Live View>Dwell

Time.

•

Start Recording:

normal record and motion detection record are supported.

•

Quick Set:

select the output mode to Standard, Bright, Gentle or Vivid.

•

Playback:

play back the recorded videos for current day.

•

Aux/Main output switch:

the DVR checks the connection of the output interfaces to define the main and

auxiliary output interfaces. When the aux output is enabled, the main output cannot do any operation, and

you can do some basic operation on the live view mode for the Aux output.

The DS-7100, DS-7200, and DS-7324/7332HGHI-SH models do not support Aux/Main output switch.

The priority level for the main and aux output for other models is as follows:

For the DS-8124/8132HGHI-SH

The DS-8124/8132HGHI-SH

provides HDMI1, HDMI2 and VGA interfaces, and the priority level for the main

and aux output is HDMI1/VGA>HDMI2. See the table below.

Table 3. 2

Priorities of Interfaces

S.N

VGA/HDMI1

HDMI2

Main output

Auxiliary output

√

VGA/HDMI1

HDMI2

√

VGA/HDMI1

√

HDMI2

The

√

means the interface is in use,

means the interface is out of use or the connection is invalid. And the

HDMI1, VGA and HDMI2 can be used at the same time.

For the DS-7308/7316HQHI-SH and DS-8108/8116HQHI-SH

The DS-7308/7316HQHI-SH and DS-8108/8116HQHI-SH provide the independent HDMI and VGA outputs,

and CVBS output. The priority level for the main and aux output is HDMI>VGA>CVBS. See the table below.

Table 3. 3

Priorities of Interfaces

S.N

HDMI

VGA

CVBS

Main output

Auxiliary output

√

HDMI

VGA

√

HDMI

CVBS

√

VGA

CVBS

√

CVBS

Summary of Contents for UD.6L0202D1962A01

















































































































































































































Search results

Summary of Contents for UD.6L0202D1962A01

Reviews:

Related manuals for UD.6L0202D1962A01

Brands by name

Popular brands

HIKVISION UD.6L0202D1962A01, User Manual

Search results

Summary of Contents for UD.6L0202D1962A01

Reviews:

Related manuals for UD.6L0202D1962A01

Brands by name

Popular brands