Network Box Camera
·
Quick Start Guide
37
37
Route the Cables through
the Cable Hole
Route the Cables
Figure 3-34
4.
Install the assembled housing to the universal joint module with
the 1/4 UNC screws, as shown below.
Housing Base
Universal Joint Module
1/4 UNC Screw
Install the Universal Joint Module
Figure 3-35
For detailed installation procedure of assembling the corrosion-proof
housing, refer to 3.3.
5.
Loosen the adjusting screw of the bracket. Adjust the surveillance
angle of the housing and camera by rotating the bracket module,
Summary of Contents for UD.6L0201B2151A02
Page 1: ...0 Camera Corrosion Proof Network Box Camera Quick Start Guide UD 6L0201B2151A02...
Page 11: ...Network Box Camera Quick Start Guide 10 Overview of Type III Camera Figure 1 3...
Page 40: ...Network Box Camera Quick Start Guide 39 Fix the Housing and the Bracket Figure 3 38...
Page 50: ...0...