HIKVISION UD.6L0201B2151A02, Quick Start Manual, Page: 30 / 50

Network Box Camera
·
Quick Start Guide
29
29

Make sure the cable size meets the inside diameter of the
sealing ring (11mm) to ensure the water-proof performance of
the corrosion-proof housing.

One of the water-proof plugs is sealed with the sealing plug by
default. If both water-proof plugs are required for routing
cables, replace the sealing plug with sealing ring in the package.

If the other water-proof plug is not for routing cables, please
make sure that the sealing plug is properly inserted.
7. Connect the RS-485 cables of camera to the RS-485 cable of layer
board, and then connect the alarm cables, audio cables, and other
cables to the cable interfaces of the camera accordingly. For the
detailed instructions of the internal cable connection, please refer
to 2.3.2.
Connecting Internal Cables Figure 3-20
8. Insert the layer board into the housing, and fix the layer board and
the housing with the supplied screws. Rotate the front cover
clockwise with the supplied lever to fix it, and tighten the screws
of the rear cover of the housing to fix the rear cover.