Network Box Camera
·
Quick Start Guide
12
12
Default Parameters
2.1
The default RS-485 parameters of the bracket are listed below:
Baud Rate: 9600
Protocol: Pelco-D
Address Bit: 0
If ABF function is supported by the network camera, please refer to
3.2 and disable ABF function for wiper control and PTZ control.
Select the power adapter according to specific requirement.
Power Supply of the Housing
2.2
External Power Supply
24V AC power supply should be provided for the corrosion-proof
housing. After connecting the power supply to the housing, a 12V DC
power supply will be supported for the camera from the power
supply module of the housing.
If 12V DC is not supported for the camera power supply, a matched
power adapter should be connected (purchased separately) to the
camera.
RS-485 Cables
The RS-485 cables of corrosion-proof housing connect with the
RS-485 terminals of camera for remote control of the wiper (only
applicable for Type II camera). Please note that the positive/negative
terminals of RS-485 should be distinguished.
Summary of Contents for UD.6L0201B2151A02
Page 1: ...0 Camera Corrosion Proof Network Box Camera Quick Start Guide UD 6L0201B2151A02...
Page 11: ...Network Box Camera Quick Start Guide 10 Overview of Type III Camera Figure 1 3...
Page 40: ...Network Box Camera Quick Start Guide 39 Fix the Housing and the Bracket Figure 3 38...
Page 50: ...0...