HIKVISION UD.6L0201B2151A02, Quick Start Manual, Page: 19 / 50

Network Box Camera
·
Quick Start Guide
18
18
3 Housing Installation
3.1 Before You Start

Please make sure that the device in the package is in good
condition and all the assembly parts are included.

Make sure that all the related equipment is powered-off during
the installation.

Check the specification of the products for the installation
environment.

Check whether the power supply is matched with your required
voltage to avoid damage.

If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.

Make sure all the required tools (cables, anchoring, electric
hammer, electric drill, wrench, screwdriver, electroprobe,
reticle and two-line round power cord, etc.) are prepared.
The wiring should be performed by professional skilled staff. If the
housing does not work properly, please check the wiring by following
the methods above.
3.2 Installing the Camera Lens
Box cameras and zoom cameras are applicable for the
corrosion-proof housing. Before installing the housing, you should