User Manual of IR Smart Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
35
AUX
AUX1 CLOSE
DWELL TIME 2
AUX2 OPEN
DWELL TIME 0
BACK EXIT
Figure 3-29
Configure the AUX Output
2.
Click
IRIS+
to edit the status of the auxiliary outputs. You can set the alarm output type as
OPEN
(normally open) and
CLOSE
(normally closed).
Note:
there are 2 auxiliary outputs configurable.
3.
Move the cursor to
DWELL TIME t
o set the duration of the auxiliary output signal. The
configurable rage is 0~60 seconds.
4.
Link the auxiliary output to the configured alarm.
Steps:
(1)
Enter
MAIN MENUS > DOME SETTINGS > ALARMS > ALARM SETTING
and choose the alarm
number that you want to link the auxiliary output to.
(2)
Move the cursor to
AUX
and click
IRIS+
to configure the auxiliary output to the alarm. You
can choose
NONE
to disable auxiliary alarm outputs, choose
1
to active AUX 1 or choose
2
to
active AUX 2.
3.7
Others
3.7.1
Setting the language of the menu
Enter
MAIN MENUS > LANGUAGE
, you can set the language of the on-screen display menu in
Chinese or in English.
3.7.2
Configuring Dome Authentication
Purpose:
You can change and enable/disable the password to set the dome authentication to prevent
unauthorized changes to the dome settings. After you set and enable the password, you need to
input the password every time you call preset 95 to enter the menu.
Steps:
1.
Move the cursor to enter password modification submenu:
MAIN MENUS > DOME SETTINGS > PASSWORD > EDIT PASSWORD
2.
Click
IRIS+
to enter edit mode.