User Manual of IR Smart Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
6
keyboards, DVRs, encoder, etc. In this and the following chapters, operation of the speed dome by
the IE browser of a DVR will be taken as an example.
Panning and tilting:
Click the direction buttons to control the movement of the speed dome.
Zooming:
Click the
ZOOM+
and
ZOOM-
buttons to control the zooming.
Focusing:
Click the
FOCUS+
and
FOCUS-
buttons to adjust the focus.
Iris:
Click the
IRIS+
and
IRIS-
buttons to adjust the iris.
2.3
System-defined Presets
Purpose:
The section lists the system-defined presets with special functions. These presets cannot be edited.
They can only be called through a control device e.g. a DVR or web browser. To call the
system-defined presets remotely, you can choose the preset number from the list in the PTZ control
panel. Please refer to table below for details.
For instance, preset 99 is the “Start auto scan”. If you call the preset 99, the speed dome starts auto
scan function.
Table 2-2
System-defined Presets
Preset NO. Function
Preset NO. Function
33
Auto-flip
93
Set manual limit stops
34
Return to initial position
94
Remote reboot
35
Patrol 1
95
Access main menu
36
Patrol 2
96
Stop scanning
37
Patrol 3
97
Start random scanning
38
Patrol 4
98
Start frame scanning
39
IR cut filter in
99
Start auto scanning
40
IR cut filter out
100
Start tilt scanning
41
Pattern 1
101
Start panorama scanning
42
Pattern 2
102
Patrol 5
43
Pattern 3
103
Patrol 6
44
Pattern 4
104
Patrol 7
46
Shortcut Patrol
105
Patrol 8
92
Enable limit stops
Note:
For details about shortcut patrol, refer to the section
3.4.3 Configuring Patrols
.
For Manchester code control protocol, the system-defined presets with special functions are shown
as below: