User Manual of IR Smart Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
21
2.
Move the cursor to
DISPLAY SETTINGS
using the direction buttons and click
IRIS+
to enter.
3.
Move the cursor to the target item and click
IRIS+
and click up/down direction buttons to
choose each display mode as
ON
or
OFF
, and define each display time as 2 seconds, 5 seconds
or 10 seconds.
4.
Click
IRIS+
button to confirm.
Note:
If you enable the
ZOOM
and
PT
OSD both, while calling a preset, the preset label will be
displayed on the screen until the preset finishes.
Display the viewing direction
The speed dome shows the viewing direction when you manually control it to rotate.
Table 3-1
Viewing Direction Display
Display
N
NE
E
SE
S
SW
W
NW
Indication North Northeast
East
Southeast South Southwest
West
Northwest
Note:
The due north direction is 0º. It is also the factory default initial position.
3.4
Configuring PTZ Control Parameters
Purpose:
You can configure panning, tilting and zooming movements, and configure PTZ control functions
including presets, patrols, patterns, etc. for the speed dome.
3.4.1
Configuring PTZ Parameters
Enter PTZ configuration menu:
MAIN MENUS > DOME SETTINGS > MOTION PARAMETER
MOTION
AUTO FLIP ON
PROPORTIONAL PAN OFF
PARK TIME 5
PARK ACT NONE
SCAN SPEED 40
IMAGE FREEZE OFF
DOME SPEED MID
BACK EXIT
MOTION
PRESET SPEED 4
LIMIT STOP OFF
<SETTING STOPS>
CLEAR STOPS
ELEVATION SET OFF
BACK EXIT
Figure 3-13
PTZ Configuration
Descriptions of PTZ parameter configuration:
Auto-flip
In manual tracking mode, when a target object goes directly beneath the speed dome, the speed
dome automatically rotates 180 degrees horizontally for tracking.
Note:
AUTO-FLIP
is set as
ON
for this speed dome by default.