User Manual of IR Smart Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
24
LABLE [PRESET 1 ]
INS
ZOOM+DELETE CONTENTS
FOCUS+CHANGE CONTENTS
FOCUS-CHANGE MARKER
ROCKER CHOOSE CONTENTS
OPEN: SURE CLOSE: BACK
Figure 3-15
Edit the Preset Label(1)
Steps:
(1)
Move the cursor to
EDIT LABLE
and click
IRIS+
to enter the edit mode.
(2)
Click
FOCUS+
in the PTZ control panel to switch between the character lists, including capital
alphabet, lowercase alphabet, symbols and numbers; click the up/down and left/right
direction buttons to move the cursor to choose a specific character to input.
(3)
Click
FOCUS-
to position the cursor on the label where the character needs to be modified.
Click
ZOOM IN
to delete it.
(4)
Click
IRIS+
to select the character from the letter/number/symbol list to the label.
(5)
Click
FOCUS+
to exit the character lists and click
IRIS+
again to confirm and exit the
submenu.
LABEL [PRESET 1 ]
INS
LOWCASE[a b c d e f g h I j]
ZOOM+DELETE CONTENTS
FOCUS+CHANGE CONTENTS
FOCUS-CHANGE MARKER
ROCKER CHOOSE CONTENTS
OPEN: SURE CLOSE: BACK
Figure 3-16
Edit the Preset Label(2)
4.
Set the preset position.
Move the cursor to
PRESET PTZ
and click
IRIS+
to edit the preset position. Use the direction
buttons to move the speed dome to find the desired scene/position, and then press
IRIS+
to
confirm the settings and return to the previous menu, or press
IRIS-
to cancel.
Note:
The preset position settings will be restricted by the limit stops if they are defined.
TASK 2:
Clear the preset settings.
Move the cursor to
CLEAR PRESET
and click
IRIS+
to clear the settings of the current preset.
TASK 3:
Call the presets.
You can select the preset number from the drop-down preset list in the control panel of the DVR