User Manual of iDS-TP40-16B Traffic Incident Detection Server
30
Figure 6-7
Add Device
Step 4
Configure the parameters.
Protocol Type: ONVIF and SDK are selectable.
Control Center: Select a control center to add the device.
Device Name: Enter the name of the device.
IP Address: Enter the IP address of the device.
Protocol Port: If you select ONVIF, the port is 80. If you select SDK, the port is 8000.
User Name: Enter the user name of the device.
Password: Enter the password of the device.
Device Type: Select the device type as speed dome or box camera.
Step 5
Click Save to save the settings.
6.4 Adding Camera
Purpose
You can add camera to an area.
Step 1
Go to Resource Management.
