User Manual of iDS-TP40-16B Traffic Incident Detection Server
42
Figure 8-3
Character Overlay Configuration
Step 2
Configure the parameters.
Select Channel: Select the camera for character overlay configuration.
Overlay Mode: Select the overlay mode. You can overlay characters below picture, above
picture, or inside picture.
Overlay Line Percentage: Enter the percentage of the overlay content occupying one line. If
the content occupies more than one line, it will break lines according to the configured
percentage. E.g., if you enter 60, then the overlay content will break lines when it reaches
60% of one line.
Upper/Left Overlay Start Coordinate: Enter the upper/left start coordinate of the overlay
content.
Number of Space(s) After Overlay Item: Enter the number of space(s) after one overlay item.
E.g., if you enter 1, there will be one space between each overlay item.
Character Size: Select the overlay character size.
Character Spacing: Enter the space number between each character.
