manualshive.com logo in svg

HIKVISION iDS-7200AHQHI-M Series, User Manual

Share
Download
HIKVISION iDS-7200AHQHI-M Series User Manual Download Page 9

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:
• Ensure recorder is installed in a well-ventilated, dust-free environment.

• Recorder is designed for indoor use only.

• Keep all liquids away from the device.

• Ensure environmental conditions meet factory specifications.

• Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a

result of dropping it may cause damage to the sensitive electronics within the recorder.

• Use the device in conjunction with an UPS if possible.

• Power down the recorder before connecting and disconnecting accessories and peripherals.

• A factory recommended HDD should be used for this device.

• Improper use or replacement of the battery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used batteries according to the instructions provided by

the battery manufacturer.

ATM Digital Video Recorder User Manual

viii

Summary of Contents for iDS-7200AHQHI-M Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands