Chapter 8 ATM Settings
8.1 Network Interception
The transaction information of ATM, including transaction card No, transaction amount,
transaction behaviour, etc., can be captured by monitoring the data package of the network
communication.
Before You Start
Connect the device and the ATM (Automatic Teller Machine) to the network properly.
Steps
1. Go to System → ATM Settings .
2. Check Enable ATM.
3. Select Input as Network Interception.
4. Enter the ATM IP address.
5. Select a protocol. If you select Custom, refer to Custom Protocol Settings for details.
6. Click Apply.
8.2 Serial Port Interception
The transaction information, including transaction card No, transaction amount, transaction
behaviour, etc., can be captured by monitoring the data package of the serial port communication.
Before You Start
Connect the device and the ATM (Automatic Teller Machine) via the serial port properly.
Steps
1. Go to System → ATM Settings .
2. Check Enable ATM.
3. Select Input as Serial Port Interception.
4. Select a protocol. If you select Custom, click RS-232 to set Protocol, Baud Rate, Data Bit, etc.
Refer to Custom Protocol Settings for custom parameter setting details.
5. Click Apply.
8.3 Network Protocol
TCP connection is established between the device and ATM in server/client mode. The transaction
information, including transaction card No, transaction amount, transaction behavior, etc., will be
sent from the ATM to the device.
Before You Start
Connect the device and the ATM (Automatic Teller Machine) to the network properly.
ATM Digital Video Recorder User Manual
66
Summary of Contents for iDS-7200AHQHI-M Series
Page 1: ...ATM Digital Video Recorder User Manual...
Page 112: ...UD16604N...
