manualshive.com logo in svg

HIKVISION iDS-7200AHQHI-M Series, User Manual

Share
Download
HIKVISION iDS-7200AHQHI-M Series User Manual Download Page 27

Volume

Adjust the Live View volume, playback and two-way audio for the selected output interface.

Event Output

Select the output to show event video.

Full Screen Monitoring Dwell Time

Set the time in seconds to show alarm event screen.

3. Click OK.

2.1.2 Configure Live View Mode

Steps

1. Go to System → Live View → View .

2. Select the video output interface.

3. Select a layout or custom layout from the toolbar.

4. Select a division window, and double-click on a camera in the list to link the camera to the

window.

Note

• You can also click-and-drag the camera to the desired window on the Live View interface to

set the camera order.

• You can enter the number in the text field to quickly search the camera from the list.

5. Click Apply.

6. Optional: Click   to start live view for all channels, or click   to stop all live view channels.

2.2 Digital Zoom

Digital Zoom zooms into the live image in different magnifications (1x to 16x).
Steps

1. Start live view, click   from the toolbar.

2. Move the sliding bar or scroll the mouse wheel to zoom in/out the image to different

magnifications (1x to 16x).

ATM Digital Video Recorder User Manual

12

Summary of Contents for iDS-7200AHQHI-M Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands