manualshive.com logo in svg

HIKVISION iDS-7200AHQHI-M Series, User Manual

Share
Download
HIKVISION iDS-7200AHQHI-M Series User Manual Download Page 108

4. Click Upgrade.

The IP camera will reboot automatically after the upgrading completes.

11.6 Import/Export Device Configuration Files

The device configuration files can be exported to a local device for backup; and the configuration

files of one device can be imported to multiple devices if they are to be configured with the same

parameters.
Before You Start

Connect a storage device to your device. To import the configuration file, the storage device must

contain the file.
Steps

1. Go to Maintenance → Import/Export .

Figure 11-9 Import/Export Config File

2. Export or import the device configuration files.

-

Click Export to export configuration files to the selected local backup device.

-

To import a configuration file, select the file from the selected backup device and click

Import.

Note

After having finished importing configuration files, the device will reboot automatically.

11.7 Search & Export Log Files

The device operation, alarm, exception, and information can be stored in log files, which can be

viewed and exported at any time.
Steps

1. Go to Maintenance → Log Information .

ATM Digital Video Recorder User Manual

93

Summary of Contents for iDS-7200AHQHI-M Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands