HIKVISION HWN-2104H-4P User Manual Download Page 75

Page: 75 / 227

Network Video Recorder User Manual

Click the

Start

button and click corresponding buttons in the control panel to move the PTZ

camera, and click the

Stop

button to stop it.

The movement of the PTZ is recorded as the pattern.

Calling Patterns

Purpose:

Follow the procedure to move the PTZ camera according to the predefined patterns.

Click the button

PTZ

in the lower-right corner of the PTZ setting interface;

Or press the PTZ button on the front panel or click the PTZ Control icon

in the quick

setting bar, or select the PTZ option in the right-click menu to show the PTZ control panel.

Click the

button to show the general settings of the PTZ control.

PTZ Panel - General

Click the

Call Pattern

button to call it.

Click the

Stop Pattern

button to stop calling it.

Customizing Linear Scan Limit

Purpose:

The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined
range.

This function is supported by some certain models.

Enter the PTZ Control interface.

Menu > Camera > PTZ

Summary of Contents for HWN-2104H-4P




































































































































































































































Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands

HIKVISION HWN-2104H-4P, User Manual

Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands