HIKVISION HWN-2104H-4P User Manual Download Page 16

Page: 16 / 227

Network Video Recorder User Manual

Panel Description

No. Name

Description

Status
Indicator

Power

Power indicator turns green when system is
running.

Status

Status indicator blinks red when data is being
read from or written to HDD.

Tx/Rx

Tx/Rx indictor blinks green when network
connection is functioning properly.

USB Interface

Universal Serial Bus (USB) ports for additional
devices such as USB mouse and USB Hard Disk
Drive (HDD).

HWN-2100, HWN-2100(M)H-W and HWN-4200MH(-P) Series

The front panel vaires according to different models.

HWN-2100, HWN-2100(M)H-W and HWN-4200MH(-P) Series

Panel Description

IR Remote Control Operations

The NVR may also be controlled with the included IR remote control, shown in Figure 1-4.

No. Name

Connections

POWER

Turns green when NVR is powered up.

HDD

Flickers red when data is being read from or written to HDD.

Tx/Rx

Flickers blue when network connection is functioning
properly.

USB Interface

Universal Serial Bus (USB) port for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).

Summary of Contents for HWN-2104H-4P




































































































































































































































Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands

HIKVISION HWN-2104H-4P, User Manual

Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands