Non-Visible Panic Alarm Station Configuration Guide
34
3.7.4 Set Password
Set the maximum password attempts, the lock duration of the locked user. And you can unlock the
user remotely.
Steps
1. Click
to enter the Remote Configuration page, go to System → Password Management.
Figure 3-39 Password Management Page
IP Address
The IP address of the terminal in which the locked user logs.
Unlock
The user's access lock status on the corresponding IP address.
2. Enable the access lock function and set the lock parameters.
1) Check Access Lock to enable the access lock function.
2) set the user lock parameters, including maximum password attempts and lock duration.
Max. Password Attempts
The maximum times that the user attempts to enter the password. By default, it is 7, the
available value is 3 to 10.
Lock Time
The lock duration of the locked user. The available value is 10 to 3600 s.
3) Click Save.
3. Optional: Click Unlock All to unlock all user.
Summary of Contents for DS-PEA101 Series
Page 1: ...Non Visible Panic Alarm Station Configuration Guide...
Page 49: ...UD24610B...
