Non-Visible Panic Alarm Station Configuration Guide
9
the device is connected to the Wide Area Network via the router.
Steps
Note
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices. The UPnP protocol allows devices
to connect seamlessly and to simplify the implementation of networks in the home and
corporate environments.
1. Click
to enter the Remote Configuration page, go to Network → NAT.
Figure 3-4 NAT Setting Page
2. Check Enable UPnP, and set Mapping Types as Manual or Auto.
–
Set Mapping Types as Auto
The Ports are read-only, and the external ports are set by the router automatically.
–
Set Mapping Types as Manual
You can edit the external port on your demand. And then you should enable UPnP function
on the router.
Caution
Please do not arbitrarily edit the default port number. If there is a port conflict and you need
to edit the port number, please modify the port number as follows.
HTTP Port
By default, the value of the HTTP port No. is 80. If the value is changed, you need to add
Summary of Contents for DS-PEA101 Series
Page 1: ...Non Visible Panic Alarm Station Configuration Guide...
Page 49: ...UD24610B...
