Non-Visible Panic Alarm Station Configuration Guide
33
You can set the time zone, NTP, DST on the Time page.
You can also click Synchronization to implement SDK synchronization.
3.7.2 Set System Parameters
Set the device name, device No. and configure the video files.
Click
to enter the Remote Configuration page, go to System → General Parameters.
Figure 3-37 System Parameters Setting Page
Set the device name and device No.. Click Save to save the settings.
3.7.3 Set Security
Enable/disable SSH service, which is used to provide security configuration for remote debugging.
Click
to enter the Remote Configuration page, go to System → Security.
Figure 3-38 Security Parameters Configuration Page
Check Enable SSH to enable SSH service, and click Save.
Note
By default, the SSH service is not enabled. The default setting will be restored after the restart.
Summary of Contents for DS-PEA101 Series
Page 1: ...Non Visible Panic Alarm Station Configuration Guide...
Page 49: ...UD24610B...
