Non-Visible Panic Alarm Station Configuration Guide
5
Chapter 3 Remote Settings
In the client software, go to Device Management, click and select the device in the device list, and
click
to go to Remote Configuration page.
Note
●
The device should be activated the first time it is used to log in and use properly. See Activation
to activate the device.
●
You need to add the device to the client software before configure it. See Add Device to the
Client Software.
●
Get the client software from the technical support, and install the software according to the
prompts.
3.1 Device Management
3.1.1 Add Device to the Client Software
Before You Start
Activate the device and ensure that the device is on the same subnet as the PC.
Figure 3-1 Client Software Main Page
In the client software, go to Device Management → Device on the Maintenance and
Management list. You can add devices to client software by several methods on the device
management page. The following describes how to add devices through IP/Domain Name. For
Summary of Contents for DS-PEA101 Series
Page 1: ...Non Visible Panic Alarm Station Configuration Guide...
Page 49: ...UD24610B...
