Swing Barrier
·
Quick Start Guide
16
3.4.9
Alarm Output Wiring
Note:
For details about changing the relay output status via the jumper cap, see 4.5.2 Alarm Relay
3.5
Wiring Lithium Battery (Optional)
Purpose:
The lithium battery supplies power for master lane control board and slave lane control board
when the device is powered off.
The battery interface position is as follows:
Before you start:
Ask our technique support and sales and purchase for the lithium battery.
Steps:
1.
Install lithium batteries.
1)
Remove the screws on the battery component to disassamle the battery component.
2)
Put the lithium battery inside the component.
3)
Secure the components on the device by the screws.
2.
Insert the battery connecter to the battery interface on the lane control board.
Note:
There are battery interfaces on both of the master lane control board and slave lane
control board.
Summary of Contents for DS-K3B601-L Series
