Storage Enclosure Quick Start Guide
15
Figure 3-6
Split HDD Plate
Figure 3-7
HDD Installation Diagram
Precautions during HDD Installation
When you plug or unplug the hard disks, please take the following precautions:
After you have plugged the hard disk to its mounting bracket, please use the
provided screws to fix the four edges of the mounting bracket.
Make sure the HDD mounting bracket is steadily plugged to the chassis along the
slot.
When you unplug the hard disk, unplug it about 3cm away from the chassis and
then make it stay about 30 seconds on the slot guide before totally unplug it
from the chassis. Since the discs of the hard disk are still spinning at a high speed
just after powering off, unplugging the hard disk immediately will damage the
discs.
The system supports disk hot swapping, yet the data storage safety is not
ensured.
