HIKVISION DS-96128NI-F16 User Manual Download Page 202

Page: 202 / 232

User Manual of Network Video Recorder

201

Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for

the user.

Local Configuration

•

Local Log Search: Searching and viewing logs and system information of NVR.

•

Local Parameters Settings: Configuring parameters, restoring factory default parameters and

importing/exporting configuration files.

•

Local Camera Management: The adding, deleting and editing of IP cameras.

•

Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),

upgrading system firmware, clearing I/O alarm output.

•

Local Shutdown Reboot: Shutting down or rebooting the NVR.

Remote Configuration

•

Remote Log Search: Remotely viewing logs that are saved on the NVR.

•

Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters and

importing/exporting configuration files.

•

Remote Camera Management: Remote adding, deleting and editing of the IP cameras.

•

Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.

•

Remote Video Output Control: Sending remote button control signal.

•

Two-Way Audio: Realizing two-way radio between the remote client and the NVR.

•

Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote client) and

controlling the alarm output.

•

Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting HDD

property), upgrading system firmware, clearing I/O alarm output.

•

Remote Shutdown/Reboot: Remotely shutting down or rebooting the NVR.

Camera Configuration

•

Remote Live View: Remotely viewing live video of the selected camera (s).

•

Local Manual Operation: Locally starting/stopping manual recording and alarm output of the selected

camera (s).

•

Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the

selected camera (s).

•

Local Playback: Locally playing back recorded files of the selected camera (s).

•

Remote Playback: Remotely playing back recorded files of the selected camera (s).

•

Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).

•

Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).

•

Local Video Export: Locally exporting recorded files of the selected camera (s).

Click the

button to save the settings and exit interface.

Only the

admin

user account has the permission of restoring factory default parameters.

16.5.2

Deleting a User

Steps:

Enter the User Management interface.

Menu >Configuration>User

Select the user to be deleted from the list, as shown in Figure 16. 9.

Summary of Contents for DS-96128NI-F16









































































































































































































































Search results

Summary of Contents for DS-96128NI-F16

Reviews:

Related manuals for DS-96128NI-F16

Brands by name

Popular brands

HIKVISION DS-96128NI-F16, User Manual

Search results

Summary of Contents for DS-96128NI-F16

Reviews:

Related manuals for DS-96128NI-F16

Brands by name

Popular brands