HIKVISION DS-96128NI-F16 User Manual Download Page 127

Page: 127 / 232

User Manual of Network Video Recorder

126

9.12

Object Removal Detection

Purpose:

Object removal detection function detects the objects removed from the pre-defined region, such as the exhibits on

display, and a series of actions can be taken when the alarm is triggered.



Please refer to the

Chapter 9.4 Intrusion Detection

for operating steps to configure the object removal

detection.



The

Threshold

[5s-20s] in the Rule Settings defines the time of the objects removed from the region. If you

set the value as 10, alarm is triggered after the object disappears from the region for 10s. And the

Sensitivity

defines the similarity degree of the background image. Usually, when the sensitivity is high, a very small

object taken from the region can trigger the alarm.



Up to 4 rules can be configured.

9.13

Audio Exception Detection

Purpose:

Audio exception detection function detects the abnormal sounds in the surveillance scene, such as the sudden

increase / decrease of the sound intensity, and some certain actions can be taken when the alarm is triggered.

Steps:

Enter the VCA settings interface.

Menu> Camera> VCA

Select the camera to configure the VCA.

You can click the checkbox of

Save VCA Picture

to save the captured pictures of VCA detection.

Select the VCA detection type to

Audio Exception Detection

Click

to configure the trigger channel, arming schedule and linkage action for the face detection alarm.

Click the

Rule Settings

button to set the audio exception rules.

Figure 9. 9

Set Audio Exception Detection Rules

Summary of Contents for DS-96128NI-F16









































































































































































































































Search results

Summary of Contents for DS-96128NI-F16

Reviews:

Related manuals for DS-96128NI-F16

Brands by name

Popular brands

HIKVISION DS-96128NI-F16, User Manual

Search results

Summary of Contents for DS-96128NI-F16

Reviews:

Related manuals for DS-96128NI-F16

Brands by name

Popular brands