Storage System User Manual
80
Connect all data network interfaces to network via network cables.
8.1.2.1
Creating Bond
Steps:
1.
Check the checkboxes of data network interfaces in Basic Network Interface list.
2.
Click
Bind Network Interface
and click
OK
in confirmation dialog box.
Figure 8. 4
Bound Network Interface Information
8.1.2.2
Deleting Bond
Steps:
1.
Check the bound network interface checkbox.
2.
Click
and click
OK
in confirmation dialog box. Then the bound network interface is recovered
to several data network interfaces.
Figure 8. 5
Confirmation Dialog Box
8.1.2.3
Modifying Bonding Mode
For detailed information and steps, refer to
section 8.1.5.2 Binding Mode
.
8.1.3
Adding Route
Purpose:
By default, the route is empty, clients in different network segment access the storage system via the default
gateway. If you want to access the storage system via a specified gateway, add route here.
Steps:
1.
Click
Add Route Info
in Custom Route Information list.