Storage System User Manual
11
1.
Use a network cable to connect the system Ethernet port and the storage system management network
interface.
2.
Configure the server IP address. Ensure it is in the same network segment with the IP address of
management network interface is 10.254.254.254.
Steps:
1.
Open web browser.
2.
Input the storage system IP address (https://10.254.254.254:2004) in Web browser address bar.
3.
Press
Enter
.
2.3
Login
Steps:
If the device has not been activated, you need to activate the device first before login.
1.
Set the password for the admin user account.
2.
Click
OK
to login to the device.
STRONG PASSWORD RECOMMENDED
–We highly recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case
letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
If the device is already activated:
1.
Select
Login
account as
Basic Management
or
HYBRID SAN Sub-system
.
Basic Management
: Used to configure basic parameters of the storage system.
HYBRID SAN Sub-system
: Used to Log into the HYBRID SAN sub-system.
2.
Select
User
name.
3.
Enter
Password
.
4.
Mode
is
Advanced
by default and is not selectable.
5.
Click
Login
to log in the system.
Figure 2. 8
Login