DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Page
66
Total
116
demand.
Save setup:
Press “Confirm” button to save preview properties. Press “Cancel” or
【
ESC
】
key to abort.
5.12 Recording Setup
In main menu, there is an icon named “Recording”. You can enter into recording menu as
following:
“Recording” menu description:
If HD Full:
There are two options: “Overwrite” and “Stop recording”. If you select
“Overwrite” option, when all HDDs in DVR are full, DVR will overwrite the earliest recorded
files and continue recording. If you select “Stop recording” option, when all HDDs are all full,
DVR will handle it as “Hard Disk Full” exception, please refer to chapter 5.17 for exception
menu.
SATA1 Disk:
For -S series DVR, 1
st
SATA interface can be extended as External SATA.
You can connect an E-SATA device (such as disk array or HDD) for either recording or backup.
In the menu, please select 1
st
SATA disk usage.
Select Camera:
Here all channels are listed. You can use
【
↑
】【
↓
】
keys to select one.
Record Para:
There are two options, “Normal” or “Event”. Event recording includes such as
Alarm recording and Motion detection recording. You can setup normal recording and event
recording separately here.
Stream Type:
There are two options, one is “Audio&Video” stream and the other is “Video”
stream only. If you want to record video and audio, please select “Audio&Video” option,
otherwise you can select “Video” option to record only video.
