HIKVISION DS-8000 Series User Manual Download Page 9

Page: 9 / 113

User Manual of Embedded Net DVR

Page

Total

113

Support multi area motion detection.

Support OSD and changeable OSD position.

Support LOGO and changeable LOGO position.

Local functions

Record

Support multiple record type, including real time, manual record, motion detection,
external alarm, motion&alarm, motion|alarm.

Support 8 IDE HDDs and each HDD can support 2000GB.

Support FAT32 file system.

Support HDD S.M.A.R.T technology.

Support cycle or none cycle record.

Support backup the recorded files and clips. Support USB memory, USB HDD, USB
CD-R/W and IDE CD-R/W.

Preview and playback

Support analog moniotor and VGA output.

Support multiple preview modes.

Support sensitive area mask.

Support camera spiteful block alarm.

Support 2-ch synchronous playback. Support play forward, backward, pause, frame by
frame, etc.

Support play back by files or by time.

Display local record status.

PTZ

Support many kinds of PTZ protocol.

Support preset, sequence and cruise.

Alarms

Support exception alarm, motion detection alarm, external alarm, etc.

Others

Support IR control.

Support RS-485 keyboard.

Support multi-level user management.

Network

Support TCP, UDP, RTP, Multicast for network preview.

Support PPPoE for board band dialup.

Summary of Contents for DS-8000 Series


















































































































Search results

Summary of Contents for DS-8000 Series

Reviews:

Related manuals for DS-8000 Series

Brands by name

Popular brands

HIKVISION DS-8000 Series, User Manual

Search results

Summary of Contents for DS-8000 Series

Reviews:

Related manuals for DS-8000 Series

Brands by name

Popular brands