User Manual of Embedded Net DVR
Page
57
Total
113
5.8 View
Tampering
Alarm
If you enable this function, when someone blocks the camera spitefully, DVR will make
warning alarm.
Step 1: Enter into “Image Setup” memu:
Step 2: Select camera:
Please use
Ç È
keys to select one camera.
Step 3: Select sensitivity:
You can use
↑
↓
keys to select the sensitivity for “View
Tampering” item. The sensitivity options are: Low, Normal and High. Select one of them will
active “Area Setup” and “Policy Setup” function.
Step 4: View tampering area setup
Move “Active Frame” to “Area” button, press ENTER
key to enter into area setup interface. The setup methods are same as that of mask area setup. After
setup the area, press ENTER key to return “Image Setup” menu. You can press ESC key to abort.
Only one view tampering area can be setup.
Step 5: View tampering alarm setup
In “Image Setup” menu, move “Active Frame” to
“Policy” button, press ENTER key to enter into “View Tampering Handle” menu:
