User Manual of Embedded Net DVR
Page
64
Total
113
as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”.
Description: If “On Screen Warning” is enabled, when there is motion alarm happened and
DVR is in preview mode, DVR will pop-up the related camera. If you trigger more than one camera,
DVR will pop-up them one by one every 10 seconds. When the motion alarm is disappeared, DVR
will restore preview mode.
Step 9: Save motion alarm setup:
Press “Confirm” button to return “Image Setup” menu. In
the “Image Setup” menu, press “Confirm” button to save the current camera parameters.
Step 10: Save all cameras:
You can repeat from step2 to step8 to setup motion detection
parameters for other cameras. Also you can copy the parameters of one camera to any other
cameras.
Note: Motion alarm area can not be copied.
If you want to disable motion alarm area and motion alarm policy, you just need to select the
motion alarm sensitivity as “Off”.
5.11 Preview Properties
In “Preview” menu, you can setup preview mode, screen switch time, enable or disable audio
preview and preview layout.
Step 1: Enter into “Preview” menu:
In the main menu, move “Active Frame” to “Preview”
icon and press ENTER , you can enter into “preview” menu.
Step 2: Preview properties:
Preview mode:
For preview mode item, you can use
↑ ↓
key to select one mode. If DVR has
only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen”