HIKVISION DS-8000 Series User Manual Download Page 34

Page: 34 / 113

User Manual of Embedded Net DVR

Page

Total

113

4.5 Manual

Record

Note: The user must have the corresponding right, DVR has HDD and HDD is formatted
already.

Manual record

In preview mode, press REC key, in the pop-up login dialog, select the name and input the

correct password, you can enter into the “Manual Record” interface.

In menu mode, press REC key to enter into “Manual Record” interface directly.

Description

Manual record interface has following parts: channel number, channel status, start/stop record,
start all and stop all buttons.

Channel:

List the channel number that DVR has.

Status:

Channel work status has 4 cases:

means idle. Green means the channel is recording

(including real time recording, alarm recording, motion detection recording). Red means network
tramsmission. Orange means both recording and network transmission.

Start/Stop:

“

” means you can start corresponding channl recording. “

” menas you can stop

recording.

Start All:

Press this button to start all channels recording.

Stop All:

Press this button to stop all channel recording.

Exit manual record

Press ESC key to enter into preview mode. Press MENU key to enter into main menu. Press

PLAY key to enter into playback menu. Press PTZ key to enter into PTZ control mode.

Summary of Contents for DS-8000 Series


















































































































Search results

Summary of Contents for DS-8000 Series

Reviews:

Related manuals for DS-8000 Series

Brands by name

Popular brands

HIKVISION DS-8000 Series, User Manual

Search results

Summary of Contents for DS-8000 Series

Reviews:

Related manuals for DS-8000 Series

Brands by name

Popular brands