DS-7700NI-
SP/9000/9600 Series HDVR/NVR User’s Manual
121
8.
Select the Apply button to save the motion detection settings and select OK to return to
the previous menu. Selecting the Cancel button without clicking Apply or OK will quit out
of the menu without saving settings.
Configuring Alarm Inputs
Certain actions can also be performed if an alarm input is triggered. To setup trigger actions:
1.
Enter the Trigger menu, shown in
Figure 136
by going to Menu > Recording
Configuration > Trigger.
Figure 136 Trigger Settings Menu
2.
Select the Alarm Input tab.
3.
Select the Alarm Input No. in the dropdown list.
4.
Edit the Alarm Name.
5.
Select the trigger Type for the external alarm input device. N.O means Normal Open.
N.C means Normal Close. These two types can be selected.
6.
Check the Enable Alarm Input checkbox to enable the selected alarm input. Uncheck the
checkbox to disable alarm input.
7.
Click Handing Set to pop-up the Handing menu, as shown in
Figure 137
.
Summary of Contents for DS-7700NI-SP Series
