HIKVISION DS-7608NI-SP Series User Manual Download Page 18

Page: 18 / 269

User Manual of Network Video Recorder

No.

Name

Function Description

MAIN/SPOT/ZOO

M-

Switch between main and spot output.

In PTZ Control mode, it can be used to zoom out the image.

F1/ LIGHT

Select all items on the list when used in a list field.

In PTZ Control mode, it will turn on/off PTZ light

(if

applicable).

In Playback mode, it is used to switch between play and reverse

play.

F2/ AUX

Cycle through tab pages.

In synchronous playback mode, it is used to switch between

channels.

MENU/WIPER

Press the button will help you return to the Main menu (after

successful login).

Press and hold the button for 5 seconds will turn off audible key

beep.

In PTZ Control mode, the MENU/WIPER button will start wiper

(if applicable).

In Playback mode, it is used to show/hide the control interface.

PREV/FOCUS-

Switch between single screen and multi-screen mode.

In PTZ Control mode, it is used to adjust the focus in

conjunction with the A/FOCUS+ button.

PTZ/IRIS-

Enter the PTZ Control mode.

In the PTZ Control mode, it is used to adjust the iris of the PTZ

camera.

Control

Buttons

DIRECTION

The DIRECTION buttons are used to navigate between different

fields and items in menus.

In the Playback mode, the Up and Down button is used to speed

up and slow down recorded video. The Left and Right button

will select the next and previous record files.

In Live View mode, these buttons can be used to cycle through

channels.

In PTZ control mode, it can control the movement of the PTZ

camera.

ENTER

The ENTER button is used to confirm selection in any of the

menu modes.

It can also be used to

tick

checkbox fields.

In Playback mode, it can be used to play or pause the video.

In single-frame Playback mode, pressing the button will advance

the video by a single frame.

In Auto-switch mode, it can be used to stop /start auto switch.

JOG SHUTTLE Control

Move the active selection in a menu. It will move the selection

up and down.

In Live View mode, it can be used to cycle through different

channels.

In the Playback mode: For DS-9600NI-ST/RT/XT series, the

ring is used to jump 30s forward/backward in video files. For

DS-8600NI-ST series, the outer ring is used to speed up or slow

Summary of Contents for DS-7608NI-SP Series














































































































































































































































































Search results

Summary of Contents for DS-7608NI-SP Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7608NI-SP Series, User Manual

Search results

Summary of Contents for DS-7608NI-SP Series

Reviews:

Brands by name

Popular brands